Aluminium entrance doors are specified because they last, resisting the warping, swelling, and corrosion that shorten the life of other materials. That durability is not maintenance-free, though. A modest amount of routine care keeps the finish sound and the door operating as it should for decades rather than years.
We set out what that care involves, from cleaning the finish to looking after the hardware and drainage, so an aluminium entrance keeps performing long after it is fitted.
Why Does an Aluminium Door Need Any Maintenance at All?
Aluminium protects itself well. The metal forms a natural oxide layer that resists corrosion, and a quality powder-coated finish adds a further barrier against weather and UV fading. What maintenance does is keep those protective layers intact and stop everyday grime from working into the moving parts.
Left uncleaned, airborne dirt, pollution, and salt settle on the surface and around the seals. Over time that build-up dulls the finish, and grit finds its way into hinges and locks, where it accelerates wear. None of this is dramatic, which is exactly why it gets overlooked until an entrance starts to look tired or drag on its hinges.
How Often Should You Clean an Aluminium Entrance Door?
For most locations, cleaning the door a few times a year is enough to keep it in good condition. The right frequency depends mainly on where the building sits:
- Buildings in exposed coastal locations need more attention, because salt-laden air is more aggressive on any exterior finish. A door right on the waterfront benefits from cleaning roughly once a month, with a fresh-water rinse after strong winds to clear salt residue. Set back from the coast, every three months is usually enough.
- Buildings in busy urban areas fall somewhere in between, as traffic film and pollution build up faster than in quieter settings.
What Is the Correct Way to Clean the Finish?
The finish is the part most easily damaged by the wrong approach, so the method matters more than the effort:
- Start by brushing or wiping away loose dirt and grit, so it is not dragged across the surface.
- Wash the door down with warm water and a mild, non-abrasive detergent, using a soft cloth or sponge.
- Rinse with clean water and dry with a soft cloth to avoid streaking.
Avoid abrasive pads, scouring creams, and harsh solvents entirely. These strip the powder-coated finish that protects the aluminium underneath, and once that barrier is compromised the metal is far more exposed to the weather. Pressure washers are best avoided too, as they can force water past the seals.
Looking After the Hardware and Moving Parts
The finish tends to get the attention, but it is the moving parts that usually fail first when maintenance is neglected.
After cleaning, apply a light silicone-based lubricant to the hinges, locks, and any rollers or moving hardware. This keeps the door operating smoothly and reduces wear on the components that work hardest. It is worth avoiding general-purpose oil-based sprays for this, as they tend to attract dust and can degrade rubber seals over time.
While you are there, check that the seals and gaskets around the door are intact and seated correctly. Perished or displaced seals let in draughts and water, and on a fire or security-rated doorset they are part of what the certification depends on, so a damaged seal is worth addressing rather than leaving.
Do Not Forget the Drainage
Aluminium door and window frames are designed with small drainage channels, or weep holes, that let rainwater escape rather than pooling inside the frame. These are easy to miss and easy to block with dirt and debris.
Checking and clearing the drainage holes as part of routine cleaning keeps water moving the way the design intends. A blocked outlet allows water to sit where it should not, which over time is one of the few things that will trouble an otherwise resilient material.
How Does This Compare With Maintaining a Steel Door?
Aluminium and steel are both long-lived, but they ask for slightly different care. The principles that make steel door maintenance schedules worthwhile apply to aluminium too: routine attention prevents small issues from becoming expensive ones.
The main difference is emphasis. With aluminium, the priority is protecting the powder-coated finish and keeping salt and pollution from settling, whereas steel maintenance leans more on protecting against corrosion at any exposed or damaged coating. In both cases, the hardware and seals need the same regular checks, and in both cases the doorset should only ever be maintained in a way that keeps its certification valid.
When Should You Call in a Professional?
Routine cleaning and lubrication are well within the scope of a caretaker or facilities team. Some things, though, are worth calling in a professional for
- Signs of finish failure such as bubbling or flaking.
- Seals that need replacing on a fire or security-rated doorset.
- Hardware that has worn or loosened.
- A door that no longer closes and latches cleanly.
On a certified doorset in particular, hardware and seals should be maintained or replaced in line with the manufacturer’s specification, so that the door still performs the way its certification describes. This is one area where a quick check with the manufacturer is better than a well-meant fix that inadvertently changes the tested specification.
Getting the Most From Your Aluminium Doors
Well-maintained aluminium entrance doors reward the small effort with a long, low-fuss service life, keeping their finish and their security performance year after year.
Bradbury Group produces the ClassicAL range of aluminium communal entrance doorsets, built from 80% recycled aluminium and independently certified. If you are specifying new aluminium entrances, or want guidance on caring for an existing installation, contact our technical team to discuss your requirements or request a quote.